presentations | about us | products | testimonials | specifications | contracting |

  contact us | home | links | news releases

 

Specifications for Containment

 

All Tank Systems Shall Consist of the Following:

 

I.     Tank

II.    Containment Vessel

III.   Interior and Exterior Paint and Coating System

IV.   Patent

 

I.     Tank

A.     Shall be designed, constructed, and labeled per UL142 specifications.

B.     Shall be of single wall construction, with all seams and fittings welded both inside and outside tank.

C.     Shall be horizontal and include UL approved integrated support saddles for zone 4 conditions.

D.     Shall show date of manufacturer’s test and manufacturer’s name.

E.      Shall be included for stationary use only.

F.      Shall include lifting eyes, for use when empty only, to lift complete unit.

G.     Shall have CAL/OSHA approved ladder on tank.

H.     Shall have a 20” manway.

I.        Shall have a 3” normal vent port.

J.       Shall have a gauge stick port.

K.    Shall have two 4” spare ports.

L.      Shall have an 8” emergency vent port.

M.   Shall have an ATG port.

N.    Shall have a 3” inlet port.

O.    Shall have a 3” outlet port.

 

II    Containment Vessel

A.     Shall be designed, constructed, and labeled per UL142 specifications.

B.     Shall be of steel construction, minimum 10 gauge.

C.     Shall be capable of containing over 110% of the volume of the tank.

D.     Shall not exceed twelve feet (12’) in width.

E.      Shall be skid-mounted, relocateable.

F.      Shall have a low point drain valve port.

G.     Shall have lifting lugs on the containment ends accessible from outside the containment wall.

H.     Shall be leak tested with full load of water after assembly.

 

III.  Interior and Exterior Paint and Coating System

A.     Shall be commercially sandblasted before painting.

B.     Exterior shall be primed with Bar-Rust 235 Epoxy Primer.

C.     Exterior shall be top-coated with Devthane 379 Urethane Finish (Navejo Beige).

D.     Interior shall be lined with Dev-chem 253 Epoxy Lining (when applicable).

 

IV.  All units are copyrighted and patented.  Anyone attempting to duplicate without the Express written consent of Bryant Tank, Inc. may be in violation of copyright or Patent laws.